Spilled water on mechanical keyboard

Spilling water on your mechanical keyboard deserve to be stressful instance, but do not worry! Tright here are a couple of simple actions to acquire your key-board nice and also dry and also functioning perfectly aget.

You watching: Spilled water on mechanical keyboard

Follow these 7 simple actions and also your keyboard will certainly be up and running aacquire in no time.

Step 1: Do Not Panic

Ok, your mechanical keyboard is wet, not an excellent start to your day. What execute you carry out next? Do not panic.

Mechanical keyboards are more water durable than you think. We’ll walk you through the procedures to settle your key-board, however it will just take time and also a tiny patience.

The worst point you have the right to execute in this instance is panic and also perform somepoint that might accidentally break your keyboard. Just follow the procedures carefully and also every little thing will job-related out excellent.

Tip 2: Unplug your Keyboard

If you have actually water on your key-board, unplug it ideal away. Water and electrical power execute not mesh well together and also while it’s unmost likely you’ll acquire shocked, it’s better safe than sorry.

Sindicate unplug your key-board from the wall outlet or the earlier of your key-board if you have actually a detachable power cable. Once unplugged, the setup is to leave the keyboard without power until every little thing is entirely dry.

Don’t be the perchild who gets impatient and also plugs the key-board earlier in prior to everything is dry as you deserve to damage your key-board this means.

Step 3: Rerelocate the Keycaps

Chances are the water you spilt on your key-board arrived at the keycaps and also dripped in between each essential.

Tbelow should be some water accumulating under the keycaps so for everything to dry effectively, you’re going to desire to rerelocate the keycaps to have the ability to clean the water.

Removing the keycaps is a pretty simple process, outlined totally in this article, however we’ll give you a brief tutorial on how to execute it.

We generally prefer to usage a keycap puller to rerelocate the keycaps, but you deserve to additionally remove them through your fingers if essential, it’s just a little bit sreduced and also slightly painful.

When removing the keycaps, gently pull and wiggle the keycaps off, bereason you don’t want to accidentally damages the stem on the key-board switch under the keycap.

It also helps to take a picture of your keyboard prior to rerelocating the keycaps, so you know specifically wbelow every one of the keys are situated for easy placement later.

Once all of the keycaps are removed, we deserve to move onto the next step.

Tip 4: Wipe Off Excess Water

With every one of the keycaps off, you should have actually straightforward access to every one of the water that collected on the surconfront of the key-board.

It’s time to wipe off all of that excess water so things dry a little faster and the water doesn’t seep right into the case of the keyboard.

We recommend wiping off the key-board with a microfiber towel. We favor a microfiber towel because a record towel will leave little paper particulates behind that stick to the keyboard and deserve to jam the switches.

If you don’t have a microfiber on-hand also a clean handkerchief or dishtowel will get the job done also. You have the right to check out more about what cleaning assets are keyboard-safe.

Wipe dvery own the surchallenge of the keyboard until tbelow are no even more drops or pools of water on the surface of the keyboard.

See more: Bio Soft D 40

Step 5: Flip the Keyboard Over

At this allude, you’re already practically done through the work! All that’s left to execute is flip the keyboard over so whatever water made it inside the instance (if any) deserve to fall out.

Sindicate put the keyboard switch side dvery own on a table that is in straight sunlight so the continuing to be water can autumn out and also evapoprice quickly. You’ll desire to leave it in this place the remainder of the drying time.

Tip 6: Wait 48 Hours

As a wise guy (or woman) once said, patience is a virtue. This is the toughest action in my endure, yet all that’s left to perform is wait.

It need to take about 48 hours for the continuing to be water to dry, so just let the key-board sit tbelow and perform not plug it in until the 2 days have passed.

If you have actually a backup keyboard, now would be the time to usage it for the next couple days while you wait for your keyboard to dry.

Once 2 days have gone by, you deserve to relocate onto the last step!

Tip 7: Plug-In and Test!

The minute of fact, time to plug in the key-board and watch if it’s still functioning. After two days of waiting it is ultimately time to see if your key-board is completely functioning aget.

Before plugging the key-board ago in, offer it a gentle shake and inspect if tright here is any type of visible water remaining. If there is, I would wait another 24 hours before plugging it ago in.

If not, plug the keyboard in and also check out if everything is working! We recommend doing a quick test to check out if all of the secrets still work-related. Tbelow is a regimen called key-test which will allow you to examine eextremely vital on your key-board super-fast.

If every one of your tricks are working effectively, all that’s left to execute it put the keycaps earlier on, then you’re good to go. Congrats!

If your keyboard or some of the individual tricks are still not working, we’ll go over what to perform next.

Is Your Keyboard Still Not Working?

If your keyboard is still not working after following the actions outlined over, you’ll should gain your hands a small dirty and also pull the entire key-board instance acomponent.

I have the right to understand if you’re feeling a tiny flustered or frustrated at this point however stick with me. We can gain your keyboard up and also running, you’ll just must be added patient.

At this point, your keyboard is most most likely still not working bereason the published circuit board (PCB) inside the key-board is wet and also it’s not able to dry while inside the case.

To settle this concern, unplug your keyboard again and also grab some tools. You’ll have to discover all of the screws that hold the key-board together and also take them out. Eexceptionally keyboard is a small different, so tbelow is not precise way to perform this. It will take a little experimenting to uncover every one of the screws.

With all of the screws removed, you can pop open up the case. Some keyboards will certainly be hosted together a bit tighter by the plastic case, in which instance you should work your means approximately the outside loosening everything till it pops open.

Now you have accessibility to the PCB, which you’ll have to take out of the instance and enable to dry on a table in direct sunlight for (another) 48 hours.

After the PCB is dry, ssuggest put whatever earlier together and also test (complying with action 7)! The key-board have to be working effectively at this allude.


Spilling water on your keyboard can be an accident that causes a lot of anxiety, yet store in mind mechanical keyboard are even more water resilient than most people think.

If you follow the salso steps outlined in this post you should have the ability to acquire your keyboard up and running in no time.

Just be patient and enable whatever to dry totally and follow the common-feeling safety measure of unplugging your key-board.

See more: Planet K Smoke Shop 2020 - Planet K Texas : In The Pursuit Of Happiness

If you still are having concerns, you deserve to pull the key-board situation open and also take out the PCB and also permit that to dry independently.

We wish you luck and also hope this overview helps your keyboard acquire ago in perfect working condition. If you desire to read more around a regular keyboard cleaning regime, inspect out this article!

Chuyên mục: Keyboard